Source the block
Selected Botticino, white and beige marble from our quarry supply network.
Fratelli Singh processing method
Fratelli Singh SelectWire processing for Botticino and Italian marble.
Our next-generation route from selected quarry block to project-ready slab—combining diamond-wire cutting, resin-line polishing, essential reinforcement and disciplined quality review.
Earlier gangsaw. Newer thin wire. Epoxy, fiber and polishing remain essential supporting stages where the stone and project specification require them.
3thin-wire machines
1resin-line polishing machine
8clear process stages
30–50%potential material-efficiency improvement*
*FS internal production benchmark against the traditional gangsaw route; actual results vary by block, cutting gap, slab thickness and final specification.
Eight considered stages
From our quarry network to a project-ready slab.
Fratelli Singh SelectWire brings source control, modern cutting, automated finishing and human inspection into one clear sequence.
Source · grade · use
Read the stone
Check tone, movement, soundness and natural variation before cutting.
Map the pattern
Plan vein direction for floors, walls, stairs, kitchens and bookmatch sets.
Choose the modern cut
Replace the traditional gangsaw route with FS diamond-wire cutting for a more controlled block conversion.
Cut with thin wire
Three thin-wire machines support controlled cutting and project-scale capacity.
Support the slab
Use epoxy, fiber backing or other support where the stone and application require it.
Polish on the resin line
Continuous resin treatment and programmed polishing support even coverage, repeatable passes and a cleaner finished surface.
Inspect and prepare
Review thickness, finish, quantity, edges and project fit before dispatch.
Built for serious project volume
The FS difference, in one system.
One central method connects sourcing, cutting, polishing, inspection and supply—so project teams can make decisions with more clarity.
FSSelectWireItalian marble processing
Three thin-wire machines
Modern cutting capacity for Botticino and imported marble.
Resin-line polishing
Continuous resin treatment and polishing support a more even, repeatable finish than conventional manual-only work.
Quarry-led sourcing
Better block knowledge before the slab is planned.
Bulk readiness
Capacity for homes, hotels and larger developments.
Slab-level review
Colour, movement, finish and quantity checked clearly.
Project guidance
Practical support from selection to specification.
Where the system matters
Processing quality changes the project outcome.
Colour starts the conversation. Cutting, finishing and consistency help carry it through.
Luxury flooring
Consistent thickness and finish support cleaner large-area installation.
Feature walls
Controlled polishing helps natural movement read clearly under light.
Bathrooms
Epoxy, fiber and suitable finishing support better wet-area planning.
Villas and hotels
Production capacity and slab consistency matter across repeated spaces.
Architects and designers
A clearer process gives specifications more practical confidence.
Long-term value
Better selection and preparation help protect the finished visual result.
Clear difference
Why thin wire and automated polish make a difference.
Each technology solves a different part of the marble process. The advantage comes from using the right one at the right stage.
Gangsaw cutting
- Earlier blade-frame method with a wider cutting gap.
- Less aligned with the precision and efficiency targets of our current setup.
- FS has moved forward to diamond-wire processing for selected blocks.
Thin-wire cutting
- Diamond wire creates a narrower cutting gap and supports cleaner block conversion.
- Controlled cutting behaviour for premium Botticino and Italian marble blocks.
- Three machines give FS more production flexibility for project quantities.
30–50%potential material-efficiency improvement in FS internal production benchmarking against the traditional gangsaw route.
Resin-line polishing
- Continuous resin treatment with programmed polishing passes.
- Supports more even coverage than conventional manual-only work.
- Finished with calibration and human quality review.
FS evaluates each block and slab specification directly, because cutting efficiency depends on the stone, dimensions, thickness and final project requirement.
Process photography
See the method behind the surface.
These placeholders are ready for original Fratelli Singh photography or approved process visuals, so the page can show real evidence instead of generic stock imagery.
Clear answers
FS SelectWire System FAQs
Useful answers for homeowners, architects, designers, builders and procurement teams comparing Botticino and imported Italian marble.
What is the FS SelectWire System?
It is Fratelli Singh’s name for a thin-wire-led marble selection and processing approach that connects block review, pattern planning, cutting, slab inspection and project preparation.
Where is Fratelli Singh based?
Fratelli Singh Pvt. Ltd. is based in Sukher, Udaipur, Rajasthan. From there, our team coordinates Italian marble selection, processing and supply for projects across India.
Which Italian marble does FS specialise in?
Botticino Classic is our signature focus, alongside selected white, beige and other imported Italian marble. Availability depends on block selection, grade, vein movement, thickness and project requirement.
Why is FS thin-wire cutting a stronger choice for Botticino?
FS SelectWire uses diamond wire to follow a controlled cutting path through the block. Compared with the traditional gangsaw route, the narrower cutting gap is designed to reduce cutting loss, support cleaner block conversion and help deliver more usable slab area for premium Botticino projects.
How does the resin-line polishing machine improve slab consistency?
A resin line helps apply and process resin in a more continuous, controlled sequence before polishing. Compared with conventional manual-only work, it can support more even coverage and repeatable finishing; calibration, tooling choice and final human inspection remain essential.
Does FS use epoxy and fiber reinforcement?
Where the stone and application require support, epoxy, fiber backing or another specified treatment may be used. Reinforcement is selected for the slab condition and intended use; it is not a substitute for correct selection or installation.
Which projects can use the FS SelectWire approach?
The process supports discussions for luxury flooring, feature walls, stairs, bathrooms, kitchens, villas, hotels and other projects that need consistent imported white, beige or Botticino marble.
Can Fratelli Singh support bulk marble requirements?
Yes. Three thin-wire machines and one resin-line polishing machine give FS a strong production base for planned residential, hospitality and commercial quantities, with consistent process control from block selection through finishing and dispatch planning.
What is the indicative price of Italian marble?
Indicative prices range from ₹200 per sq. ft. for Botticino Classico to ₹4,000+ per sq. ft. for selected Satvario (Statuario). Other listed selections include Brescia Aurora at ₹250–₹700, Vietnam White at ₹600–₹1,500+ and Venatino at ₹350–₹1,000 per sq. ft. Final pricing depends on grade, thickness, vein movement, finish, slab size, quantity and current availability. Request a current slab-specific quote before confirming a project.
How do I request Botticino or Italian marble pricing?
Share the application, approximate quantity, preferred tone, finish and delivery location through our enquiry page. Our team can then guide the suitable collection and next step.
Choose with clarity
Ask about the right slab for your project.
Share your application, quantity and preferred tone. We’ll help you understand the next practical step.